Cyberpower UPS Under Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two piece mounting bracket to suspend the Cyberpower UPS under the desk and off the floor.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 261
- Wydruki
- 0
- Wyświetlenia
- 3430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use a UPS to catch any power disruptions to my printer. It was sitting on the floor until I designed an under desk mount for it. Now, the work area looks much better and easier to keep clean. This design allows for the mounting of the UPS under the desk via the top set of screw holes or on a side of the wall or desk via the two side holes.
I printed the two (2) sets of two (2) parts in PLA for minimal flex. If you have ABS or PC, that works too. Printed with 0.4mm nozzle, layer height at 0.20mm speed, 30% GRID infill, and 3 perimeters (for added strength). The UPS is heavy so do not compromise on the amount of filament used. My 5DC logo is included if you want to add some color to the mounts.
You will need additional hardware, qty four (4) of M4x20 flat head screws and qty four (4) of #10 flat head wood screws to length as required (i.e. 1-¾" for top holes, 2" for side holes).