Dollhouse Table with Removeable Legs -- CAD and STEP file included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed table to have removable legs, for strength.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
I re-designed this table in FreeCAD to have removable legs. This way you can print them separately with orientation and material optimized for strength. You can also replace one if it breaks.
I also tapered the groves in the table top to remove the need for tiny bridging.
The dimensions are nearly identical to the original.
FreeCAD and STEP files included.
Printing Instructions:
Models are oriented for printing. No supports required. I used PLA+
Top prints well with default settings. Variable layer height will make the beveled edge look nicer. Concentric bottom pattern looks better (resembles wood grain) than diagonal lines.
Legs print vertically (as oriented.) I used a 10mm brim and 6 walls. No infill.
Legs should fit tight if your printer is calibrated correctly. Otherwise, adjust your settings (X-Y contour compensation and X-Y hole compensation) or use glue.