Lego f1 Mercedes W14 E wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall hang for the Lego Mercedes F1 car with the exact width so 2 one against the other is the distance you need.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
I have bought the Lego set of Mercedes car in f1 and after completing assembling it I wanted to hang it on the wall.
I designed the hanger so putting one against the other is the exact space between the mounting points in the car itself.
in order to use it you need to print 2 units.
The car is hanged with its nose pointing downwards.
I printed this with petg for surviving longer time under continues load.
Printing Paramaters
Use petg for reducing creep and holding on for longer
A higher infill is recommended - I used 25/30% if I remember correctly.
print in an orientation where the layers will be perpendicular to the wall and use supports - you need the interlayer strength.
