Magnetic Polish Glass Bead Effect Spinner with Peephole (Hardware-Free)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hardware-free version of the glass bead effect spinner with a peephole for easy alignment.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to make a hardware-free version of the Glass Bead effect spinner. I thought it would be fun to add a peep hole so you can see the effect happening as you spin.
Parts:
The Housing: this holds the spinner above the nail, and should be printed on its side.
The Magnet Holder: this holds the magnets at the right distance to create the effect.
The Retainer: this keeps the magnet holder from flying off the housing as you spin it.
Assembly:
The Parts are put together slightly differently from past spinner models. The Magnet Holder sits on top of the housing.
With Magnet Holder facing up, line up the hole in the Magnet Holder with the hole in the Housing.
From the top, press the Retainer first through the Magnet Holder, then the Housing until snug
If the retainer loosens over time, you can disassemble, swipe a bit of glue around the edge of the hole in the Housing (be careful not to get any on the Magnet Holder), and reassemble.
Magnets:
Holds magnets of dimensions 10mm wide, 6mm high (total), and up to 30mm long.
Magnets used in picture: https://a.co/d/5eTmshe
For those sourcing magnets elsewhere, the magnets are magnetized through the thickness (N/S are on the faces, not the ends or the sides)
Tips:
For smoother spinning, gently file the seam on the retainer until flat.