1 / 5
Creality Hi Build Plate Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact and lightweight stand for Creality Hi build plates
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Had a few spare build plates laying around and wanted to organise them. Should work for any build plates with a width of between 240-265mm and a thickness of less than 1.6mm, but keep in mind it's been designed with the Creality Hi in mind.
There are two versions available, one that prints as a single piece (stand), and one that prints in 3 pieces (base and 2 x slots) and requires some heat-set inserts (I used M3 5x5) and M3 screws to assemble. Make sure you're printing the one you want!