WS2812B Soldering Jig - Parameterized Wire Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a soldering jig for WS2812B pixel LED lights.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a soldering jig for WS2812B pixel LED lights.
All the models I found were locked into a specific wire size, so I spent the afternoon making one that we could modify the wire width on. I have confirmed this works with 1.4, 1.3, 1.2, 1.1, 1.0, and .9mm wire outer diameters. Going up in size is more likely to break it because of the fillets and wall sizes. Going down in wire size should be OK mostly.
Suggested printing in high-temp materials (you're soldering after all). PETG should be fine. I definitely melted my PLA test models.
Updated 2026-04-18
Found that the model was incorrectly sized for proper WS2812B LEDs, but corrected now.
Added text on bottom of print to indicate the wire width size. This will automatically update in customizer based on the Wire Width.
Recommended Print Settings:
None really, but you might need to tweak elephants foot compensation to see the size text on the bottom. I used standard Voron print settings:
.2mm layers
.4mm line width
4 walls
5 tops/bottoms
40% Gyroid
You can make custom wire sizes by downloading the Fusion file or by checking this out on Makerworld: https://makerworld.com/en/models/2671567-ws2812b-soldering-jig-parameterized-wire-sizes