Floorball Stick wall Holder with Nameplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Floorball Stick wall Holder with Nameplate
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Floorball Stick Wall Mount with Customizable Nameplate
A practical and stylish wall or cabinet mount for two floorball sticks. This design features a clever hidden-screw system – the mounting screws are covered by a customizable nameplate, giving it a clean and professional look.
Compatibility & Sizing:
Standard Fit: Designed specifically for standard floorball sticks (usually used with sticks 110 cm and longer).
Adjustable for Other Sizes: If you have thinner junior sticks or want to use it for different types of sports gear (like ice hockey sticks), you can easily resize the model in your slicer:
How to resize: Select the model, use the "Scale" tool (shortcut 'S'), and increase or decrease the percentage.
Tip: If you change the size, remember to resize the nameplate by the same percentage so it still fits perfectly into the slot!
Main Features:
Holds 2 Sticks: Securely snaps your floorball sticks into place.
Customizable Nameplate: Personalize the holder with your name or team name.
Hidden Hardware: The nameplate covers the mounting screws for a sleek aesthetic.
Versatile Mounting: Can be screwed onto a wall, a wooden cabinet, or the side of a desk.
How to Customize the Name:
You can easily change the name directly in your slicer (e.g., Bambu Studio or OrcaSlicer):
Open the project.
Locate the text object on the nameplate.
Click on the "CLICK ME" text (or right-click the text layer) and select "Edit Text".
Type your name and you're ready to print!
Assembly Instructions:
Mount the Base: Screw the main holder to your desired surface using two countersunk screws.
Attach the Nameplate: Once the holder is securely fixed, apply a small piece of double-sided tape to the back of your printed nameplate.
Cover the Screws: Press the nameplate into the center recessed area. This will hide the screws and finish the look!
Print Settings Recommendations:
Material: PLA, PETG (recommended for better clip flexibility), or ABS/ASA.
Infill: 15–20% (Grid or Gyroid).
Walls: 3–4 loops to ensure the clips remain durable.
Supports: No supports required.