Mavic Pro Landing skid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the v1.1 skid for the Mavic pro, the original doesn't remove once it's on so I made it removable but still…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 1682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of the v1.1 skid for the Mavic pro, the original doesn't remove once it's on so I made it removable but still won't cover the sensors underneath. Approx 30mm or 1.2inch lift.
May get an update that fits a little nicer underneath, the current version is a little loose.
UPDATE:
It does sometimes cause the sensors to fail on take off and continue to rise beyond 1.2m (thinking it is still on the ground). When it happens I've landed it and taken off again and it is fine, only on occasional takeoff, once it is in the air it is fine for some reason.