Vase Kety multicolor (no mmu)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,80 € – 4,65 € netto (bez VAT)
Dla pliku: Kety_0.4n_0.2mm_PLA_MINIIS_3h4m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,23 € netto (środek widełek).
- Masa podana przez autora
- 77 g
- Czas druku podany przez autora
- 3,07 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Vase with clean top edge by printing it upside down.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Vase I designed called Katy. I couldn't find a angled vase that I like with nice curves and smooth lipstick red edge. And doesn't require MMU.
Hopefully we start to see more vases that you print upside down and get a texture from a bed you like.
Print instructions
Print upside-down
support is highly recommended so it doesn't flip
you can add brim but keep in mind that edge wont be as clean
Typs and tricks
Make sure your seam is in the back for cleaner look
Firs color should be minimum 2 layers (I did 0.8mm red then black)
If you print with no support make sure your adhesion is good or you will get this (picture below)

For Commercial Use reach out to me, or any improvement you may want.