Articulated, adjustable, 3D printed arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable 3D printed arm using M3 bolts and nuts
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
An adjustable 3D printed arm using M3 bolts and nuts, you will need two of each per hinge. Use a reasonably hard filament like PLA. Adjust the friction of the hinges with a screwdriver, hinge needs support. I recommend printing with an isotropic infill like gyroid for higher strength as rectilinear or cubic has breaking points. My settings were 10% gyroid. Print as many pieces as you like to make it as long as you want, start with at least 3 of both the arm and hinge. There is an adapter for alligator clips. I will probably add more "modules" later. You can use one of the bases or just glue it to a decently wide object instead.