Gasmask Inlet-Cap Shigematsu STS-CF01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlet-Cap for the Shigematsu STS-CF01 Mask
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inlet-Cap for the Shigematsu STS-CF01 Mask
Inspired by Jan Asleep's model “NATO 40mm Gas Mask Inlet Carb”
(https://www.printables.com/model/1180064-nato-40mm-gas-mask-inlet-carb)
These caps are specifically designed for the bayonet mount on the Shigematsu STS-CF01 mask.
(I don't know if they fit other Shigematsu masks as well)
The caps have lots of small holes on the sides so that air can continue to circulate freely.
There are three versions: plain, with the “radioactive” logo, and with the “hazmat” logo.
print with face down (also the ones with logo)
0,2mm layerhigh
without brim
without support
3 perimeters
100% infill (for best stability)
Use at your own risk! Not for commercial use!
see also my Gasmask Inlet-Cap with Nato RD40x1/7 thread.
https://www.printables.com/model/1694076-gasmask-inlet-cap