Blaupunkt Air Cooler Cube Holder for Small Arm System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray to support the Blaupunkt Air Cooler Cube using the Small Arm System
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This model is a tray to hold the Blaupunkt Air Cooler Cube, compatible with the Small Arm System that comes as part of the Multifunction Arm Mounting System. I use this with the remixed clamp for the small arm. No doubt it could be used for other devices or even pencils, etc.
The tray should be attached to the holder from the Small Arm System using M4x12mm pan head screws.
I designed this tray in FreeCAD. I'm a beginner at CAD so I'm sure there is room for improvement. It's a very basic design. FreeCAD file is included, as well as the STL and 3MF ready for printing.
The arm should be printed with many walls and lots of infill, but the tray doesn't need anything special.