1 / 4
Gasmask Adaptor Nato-RD40-Male 60-degree — zdjęcie 1
1 / 4

Gasmask Adaptor Nato-RD40-Male 60-degree

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Male Gasmask-Adaptor 60-degree angle with Nato RD40x1/7 thread. for Mask's like AVON FM12 or AVON S10 or similar....

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Male Gasmask-Adaptor 60-degree angle with Nato RD40x1/7 thread.
hose-flange has a diameter of 22,5 mm - the threaded section can rotate freely
(fits CPAP-hose's ore corrugated rubber-hose's from some fetish-store's)
(fits NOT russian (Warsaw Pact) ore chinese hose's)

With gas masks that have a side connection, it always bothered me that the hose doesn't hang straight down, whether it's attached with a straight adapter or a 90-degree angled adapter.
That's how I determined the angle on my AVON FM12 so that the hose hangs down reasonably straight.
I think the angle should work also for the AVON S10 mask as well.

  • 0,2mm layerhigh

  • without brim

  • base unit with support (see picture)

  • 3 perimeters

  • 100% infill (for best stability)

Installation Instructions:
The plug-in sleeve is designed to be pressed firmly into the base unit.
If you want to be on the safe side, you can apply a small amount of superglue there.

Use at your own risk! Not for commercial use!
see also my other Gasmask-Adaptor's :-)
https://www.printables.com/model/1693950-gasmask-adaptor-nato-rd40-male
https://www.printables.com/model/1693962-gasmask-adaptor-nato-rd40-female

Tagi