OnePlus Watch Charger Keychain Case: Personalized 3D Printed Travel Holder

OnePlus Watch Magnetic Keychain Case (Hidden Block Magnet Design)

Tired of tangled cables? This is a premium, secure travel case for the OnePlus Watch 2, 2R, and 3 official chargers. This model is specifically designed for 5x10x3mm block magnets that are fully enclosed within the print for a clean, professional finish.

🛠 Hardware Needed

• 12x Rectangular Magnets: 5mm x 10mm x 3mm.

  • Top Lid Part: 5 magnets.

  • Nest (Bottom) Part: 7 magnets (5 for the lid, 2 to secure the charger).

🖨 Print Settings & Layer Pauses

To achieve the "hidden magnet" look, you must program a Pause in your slicer at the specific layers mentioned below. When the printer pauses, drop the magnets into the slots and resume.

• Material: PLA (Recommended)

• Nozzle: 0.4mm

• Layer Height: 0.20mm (Standard mode)

Layer Pause Instructions:

1. Top Part: Pause at Layer 65. Insert 5 magnets.

2. Nest Part: 
    Layer 19: Pause and insert 2 magnets (to hold the charger puck).
    Layer 65: Pause and insert 5 magnets (for the lid closure).

[!IMPORTANT]

Magnet Orientation: Check your polarity before resuming! Ensure the charger is pulled into the nest and the top lid snaps firmly to the bottom part. Since these are rectangular magnets, they will not rotate once the next layer is printed.

📦 Features

• No Glue Required: Magnets are trapped permanently inside the plastic layers.

• Perfect Fit: Modeled specifically for the official OnePlus Watch charging puck.

• Keychain Ready: Features a reinforced loop to attach to your keys or bag.

🔍 Compatibility

• OnePlus Watch 2 / 2R

• OnePlus Watch 3 / Watch 3 (43mm)