Tripod Adapter for Cotton Carrier "Twist Lock" harness Camera fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accepts the Cotton Carrier camera fitting on a standard tripod. 2 types; one that slides on and one that locks
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you hike, you may use the Cotton Carrier Twist and Lock camera harness or sling. These use a special fitting attached to the tripod mount. While this fitting still has a standard 1/4-20 tripod thread, wouldn't it be easier if the tripod would accept the twist and lock fitting itself?
Here it is. This design is easy to print and attaches directly to the tripod. To use it you simply screw it onto the tripod. The camera then slides onto the mount. The fit is tight and very secure (note only the "Lock" version is locked in but can rotate, the other will slide but not rotate however it is not locked in so it will slip to the right if forced).
Print in PET-G, ASA or ABS for best results and be sure to print as shown, this will eliminate the need for supports and yield a stronger part.