1 / 4
19" 2.5U Rack M-ATX Mainboard with ATX PSU — zdjęcie 1
1 / 4

19" 2.5U Rack M-ATX Mainboard with ATX PSU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

19" rack-mount enclosure for M-ATX mainboard and ATX-PSU

Ocena
0 / 5
Polubienia
8
Pobrania
73
Wydruki
0
Wyświetlenia
532
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

Hello together,

have designed a 19-inch 2.5U rack-mount enclosure for an M-ATX motherboard and an ATX power supply.

The motherboard bracket supports both M-ATX variants: the small and the large.
The large M-ATX variant is primarily used when there are four RAM slots.
When you have the large on you must prin additional the "mainboard_extension.slt"

Under the motherboard bracket it is also possible to install the Jet-KVM Extension board.

For all screws, I use M3 brass threaded inserts with a hole diameter of 4 mm

All was printed in PLA with 40% Infill Type Gyroid.


Happy printing.