D-Link DGS-108 10inch Mini Rack shelf

Compatibility

This rack shelf if design to accommodate a network switch D-Link DGS-108, model EGS108E C2E to be precise.

The D-Link DGS-108 switch has varied over the years, your model may have a different size ! Please check carefully before printing.

This model accommodates a switch with the following dimensions:

• width: 162 mm

• depth: 103mm

• height: 31 mm (with rubber feet, 28.2mm without)

Features

• 1U switch mounting shelf for 10" mini-rack

• Good airflow around the switch

• Optional mounting screws on the side to secure the switch in place, see instruction below

Optional securing solution

You can secure the switch in place with the help of 2 screws on the sides. This requires additional hardware:

• 2x M3 hexagonal nuts

• 2x M3x8mm machine screw

Printing

I recommend printing in PETG or even ASA. I advise against using PLA, in my experience the switch will heat enough to deform PLA over time.

I recommend the following settings:

• layer height: 0.30mm

• perimeters: 4

• infill: 10%

I used Colorfabb Economy PETG (Grey) and Prusament PETG (Orange) for my print.

Design file

If you would like to adapt this model to fit your needs you can fine the CAD file here: D-Link DGS-108 10inch rack shelf | impulse1delta | onshape.com -> https://cad.onshape.com/documents/7df61ecf4ad48714bf0b2a5f/w/9f614d773df42975ce33f235/e/de649e55d4487f5d1a91d989?renderMode=0&uiState=69e532ddc332c520631cb772

If you would like me to publish files for your version of the D-Link DGS-108, drop me a comment !