AIRSOFT- Halo M392 gbbr kit for AAP01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Halo M392 dmr as an airsoft gas blowback replica
- Ocena
- 0 / 5
- Polubienia
- 14
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant.
This project used an AAP01 as a base platform, but this is not merely a shell. This project takes the trigger, trigger bar, trigger bar spring, mag catch spring, hammer housing/FCG, bolt, and hop chamber from the AAP01 and puts them in a custom chassis.
Custom baseplates have been created for mags in order to provide the appearance that 7.62mm DMR mags are seated in the rifle.
This kit provides a proper bullpup layout with a reciprocating charging handle and bolt lock on empty. The flash hider is removable to provide access to -14mm threads to mount a tracer.
Complete bill of materials is provided for ease of sourcing the correct hardware.
As the M392 is a DMR, it’s recommended to upgrade the inner barrel and bucking for better overall performance.
Pictures show the M392K variant
Installation instructions:
https://bit.ly/m392_install
As this kit uses heat-set inserts, a soldering iron is required to prepare parts before assembly.