USS Drybox Sleeve Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An internal bearing that ensures non-prusa (specifically Jessie and Polymaker) spools function as well as Prusa spools.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I modified Timetraveler's idea and drafted a sleeve for the inside of the USS Drybox to center my primary non-Prusa spools (Jessie and Polymaker) for better performance with these new dryboxes. Without the sleeve, these spools will rub on the bottom of the drybox and cause print issues and additional wear on the nextruder. I also added a little lip around the edge of the sleeve to allow for cardboard spools to spin a bit easier when the box is on its side.
I would recommend printing these with a random seam to ensure as smooth of an operation as possible. I did mine with PETG, 2 perimeters, and a basic 5% infill.