Seatbelt Holders - Stop the flapping!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seatbelt clips and buckle holders to stop the flapping
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A lot of vehicles out there have the issue with the seatbelts (especially the rears) flapping and clapping against the plastic trim or the seat when the windows are open and they are unbuckled.
This model was designed for my 2026 Ford Ranger Raptor, but may fit other vehicles. The front has a wider/angled opening because the Ford buckle has an angle to it. There is no front driver because well... you should be wearing your seatbelt
Printed in CC3D PBT Pro, 4/4/4 with 25% infill. Held in place with Scotch 25mm Extreme tape. If that fails I'll upgrade to 3M VHB.