Controllable Poop Chute Door for Elegoo Centauri Carbon 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An indicating lever opens or closes a door covering the rectangular poop chute opening at the back of the machine.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Inspired by my struggles getting the chamber warm enough to print ABS well, I wanted to create a door to cover the poop chute hole to help keep in heat from a mini heater inside the chamber. I also wanted to easily open and close the door without having to look around the back of the machine (up against a wall) to see if it was open or not. This is the result!
Features:
Helps to maintain chamber temperature by sealing poop-chute opening
Attaches to the back of the machine using existing screws
Included slide to redirect the flow of waste around to the spool-side of the machine
"X" and "O" markings to indicate door position
Required hardware:
2x M3x6mm screws
1x M3x10mm screw
superglue
Notes:
The door and the main bracket include built in supports that can be easily removed with fingers and or pliers. Position the objects on the plate as follows:
Assembly:
Use super glue to glue the DoorChannel to the Slide, and add the screws like so before attaching to the printer. The longer M3x10mm goes at the fulcrum (center) of the lever
On the machine, open position:
From the front, Open position:
Closed position:
From the front, closed:
