Taco Bell sauce holder/dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Taco Bell sauce holder/dispenser.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 281
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Taco Bell sauce dispenser. While there's plenty out there, I wanted to make this one a bit more personal and design it more after a Taco Bell building. Decided on 3 slots as normally we only use 2 or 3 sauces at most. Features slots in the back to show if sauce needs a refill without taking the lid off, but the lid does come off to refill. The logo has a pause on each element allowing to swap filament to black/purple to achieve the effect. The logo must be glued after printing, as this was designed/made without AMS/multicolor capabilities. The chimney can be glued or left off.