1 / 3
Portable Mace / Gada — 3D Printed PET Bottle Fitness Trainer — zdjęcie 1
1 / 3

Portable Mace / Gada — 3D Printed PET Bottle Fitness Trainer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn any PET bottle into a functional Macebell! 💪 This isn’t just a bottle holder — it’s a full-body fitness tool.

Ocena
0 / 5
Polubienia
13
Pobrania
43
Wydruki
0
Wyświetlenia
354
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Public Domain

Portable Mace / Gada — 3D Printed PET Bottle Fitness Trainer

(Description)

Turn any PET bottle into a functional Macebell! 💪

This isn’t just a bottle holder — it’s a full-body fitness tool. I designed this model so you can turn a standard plastic water or soda bottle into a Mace (Gada) , a popular piece of equipment for rotational and grip strength training.

✨ Key Features:

  • Travel-Friendly: Stop lugging heavy cast iron maces around. Buy water anywhere, attach this handle, and you have a gym in your bag.

  • Universal Fit: The clamp design allows it to fit securely on any standard PET bottle neck (e.g., 0.5L, 1L, 1.5L).

  • Dual Use: It’s a sports equipment first, but it also works as a simple carrying handle to hook bottles onto your backpack or bike.

🤔 Why print this?
This solves the classic problem of bottle holders being static. Here, the bottle becomes the weight. Fill it with water for light flow/mobility work, or fill it with sand/gravel for a heavy 2-3kg steel mace substitute.

🖨 Print Instructions

  • Material: PETG or ABS recommended (for durability), PLA is fine for light use.

  • Layer Height: 0.2mm

  • Perimeters: 4+ (Increases strength so it doesn't snap when you swing it)

  • Infill: 25-40% (Gyroid or Cubic)

  • Supports: [Укажи, нужны ли поддержки. Скорее всего: NO / YES, on build plate only]

🔧 Assembly & Use

  1. Print the two halves (or the clamp body).

  2. Screw the holder onto your bottle cap thread, or clamp it around the neck.

  3. Crucial: Make sure the bottle cap is tight!

  4. Start swinging! (Recommended to start with an empty bottle for safety checks).

Tagi