Newmar Mountain Aire HVAC Controls Fascia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement fascia to condense HVAC controls in a Newmar Mountain Aire into 1 panel
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
In an effort to cleanup the look of the Newmar Mountain Aire dash, and to facilitate a double DIN radio, I modeled a replacement fascia to condense all HVAC controls onto a single panel. The temp controller, zone selector, and temp sensor all fit on this panel.
The zone selector bracket is a tight fit and will require slight bending to clear the temp sensor.
I do not recommend printing this in PLA due to the automotive nature of the dashboard. PLA will eventually warp and sag with the outdoor heat and the harness pulling on the panel.