Prusa XL 5020 (Core One Mod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mod that allows you to use the Big Core One 5020 print fan on the XL 2T / 5T
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 3
- Wyświetlenia
- 233
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a easy mod for the XL to use the 5020 from the Core One / Core One L.
this is a better version of my 5015 fan mod
PLEASE READ THIS
This mod is for the XL with 2T/5T WITHOUT the official enclosure !
If you have the official Prusa enclosure you can use the fan duct, but you need an other fan body.
DanHas has made one :) <---- with official enclosure
it fits on the 2 Toolhead and the 5 Toolhead version , I'm NOT sure if it fits on the SINGLE TOOLHEAD version of the XL!
Parts you need to buy:
Core One Fan (L) 5020 : Print Fan
You need some supports like you can see in the picture
Print it at least in ASA/ABS i recommend PC-CF or something that is heat resistant
Instillation
Print the housing and the duct and simply use the original screws from the XL.
1. open the fan the are 3 clips
2. cut the corner like on the picture
3. Place the fan in the housing and put the cable in it's slot
the cable is longer than the stock XL fan but the is plenty of space .
Use the 3 screws to fasten the housing and the duct
if you got an Fan Error on the calibration , set the print fan on silver
The cut for the frame is thigh but it didn't collide with the frame at all.
