Sennheiser Momentum 4 Magnetic Standby Wall Mount and Desk Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder for Sennheiser momentum 4 headphones that mimic the auto standby feature of the first party case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I keep my Sennheiser Momentum 4 headphones hanging on the side of my desk, and I wanted to replicate the automatic standby behaviour of the official case that puts the headphones to sleep as soon as you store them using a magnet.
To do that, I modelled a small cradle that mounts on the wall beneath the headphones, with a magnet placed in the exact same position as the one in the official case. I also cut an opening beneath the USB port, allowing you to charge the headphones in place.
This is just a first prototype, but it worked well enough that I wanted to share it. Hopefully it's useful to others and I'd also love any feedback on how to improve the design, as I'm still very much a beginner with 3D CAD.
Bill of Materials:
- 1× magnet, 20×10×1mm
- 2× Phillips wood screws, 4×20mm
- Two component epoxy glue
Few notes:
I don't know if the magnet orientation matters, but to be safe I checked the one in the case and matched it.
UPDATE:
I also made a desk stand with the same functionality! It comes in two versions: a clean basic model and a second one featuring a 45-degree stripe cutout pattern.
I printed it in PLA with 5% gyroid infill and 2 walls. It flex a tiny bit with the headphones on but it doesn't bother me too much.