1 / 3
Irrigation micro-sprinkler 10-32 to 1/4” barb adapter — zdjęcie 1
1 / 3

Irrigation micro-sprinkler 10-32 to 1/4” barb adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Micro-sprinkler barb adapter.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I picked up some micro-sprinklers for our irrigation system and didn't realize they had threaded 10-32 connectors instead of a barb connection. Made this little adapter so I can just slip the 1/4" line right onto it instead of buying their special stakes and fittings.

Printer: Ender 3v2
Filament: PLA

Infill: 50%
First layer height: 0.3
Layer height: 0.2
Brim: 1mm

After printing, clean up the threads with a 10-32 tap, and clean up the hole on the barb end with a 1/16" drill bit.