Wall-Mounted Utility Hook (No-Drill)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-Mounted Utility Hook (No-Drill), made with PLA
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Fully optimised for attachment using double-sided adhesive tape (e.g. 3M), allowing installation on walls, furniture or tiles without drilling holes.
Design Specifications
Flat base: Wide contact surface for maximum adhesion.
Geometry: The raised edge prevents objects from slipping.
Dimensions: Optimised for standard holes in mop and brush handles.
Recommended Print Settings:
Material: PLA, PETG or ABS/ASA.
Orientation: For maximum mechanical strength, we recommend printing the part on its side (this prevents the weight from causing layer separation).
Perimeters: 3 or 4 (to give the arm rigidity).
Infill: 20% (Helix or Grid).
Supports: Optional (if printed on its side, they may not be necessary depending on your printer’s bridge).