1 / 1
Fahrradreifenmontagehilfe / bicycle tyre mount clamps — zdjęcie 1

Fahrradreifenmontagehilfe / bicycle tyre mount clamps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Werkzeug zum Aufziehen des Reifens auf die Felge / Helpful little tools to mount the tyre on the rim

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Wenn die Handkraft nicht ausreicht, um den engen Reifen auf die Felge zu bekommen, einfach 2 dieser kleinen Helferlein drucken, statt mit dem Reifenheber aus Metall und zu viel Gewalt die Felge zu zerkratzen. Die Helferlein an der Stelle, wo es nicht mehr weiter geht einstecken und man kann den Reifen ringsrum in Ruhe in die Felge drücken, ohne daß er wieder abspringt. Tip: Mit Talkumpuder flutscht es besonders leicht.

2 Varianten sind vorhanden: regulär und biegesteif

Whenever sheer handpower isnt enough to get the tyre on the rim, use 2 of these little clamps to fix the curent endpoints of your efforts, then take your time to shove the tyre all around deep in the rim so that the last bit gets more easy to push over the side walls. Tip: Application of some baby powder (talcum) makes it even easier.

2 variants are included: regular and stiffened

How to print:

  • Use highly impact resistant (ductile) material, or the tools will break under stress!

  • I printed mine with a nozzle of 0.4mm and a layer height of 0.2mm, had the number of perimeters set to 5 and full upper and lower layers set to 4; infill was 30%.

Tagi