Minolta AF-Tele Shutter Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
A replacement for missing or broken shutter button for Minolta AF-Tele 35mm Film Camera.
This design makes use of a 4mm diameter spring to keep the button pushed up. I took a 4mm diameter spring from a ballpoint pen and cut it to be about 5mm in length uncompressed. It works wonderfully.
This print is designed to be printed vertically! Make sure you print it in the correct orientation. The model should already be in the correct orientation when you drop it in the slicer. (See slicer photos)
This is to make sure the retainer clips have as much strength as possible while also having the flexibility to snap into place and keep the button from falling out.
Relevant Print Settings:
- Layer Height: 0.1mm
- Supports: Enabled
- Printed on a Raft
Takes about 10-15 minutes to print with the default settings on my K1C.