Revo Micro + Sherpa Mini mount for Prusa Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Sherpa Mini extruder mount for Prusa Mini in combination with Revo Micro
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 100
- Wydruki
- 3
- Wyświetlenia
- 1876
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've tried to adapt the Prusa Mini Sherpa Mount by athlon789789 to mount over a Revo Micro on a Prusa Mini and decided to share it with you. It may not be the perfect solution, I'm just starting 3D printing/modeling.
The Revo Micro mount is mostly the original one provided by E3D, I just added an extra hole on the side for the Sherpa Mini Mount.
The tolerances are a bit tight, so depending on your printing material/settings, it may be a tight fit/some sanding may be needed.
I also provided the STEP file to allow for mods.
I've printed them in both ASA and PETG with Variable Layer Height and 50% infill (probably overkill but I wanted to make sure they are strong).
Update 2022-05-04: I've updated the Sherpa Mount a bit, moved the cable clip mount 1mm to the left. The original version was too small and the cable clip wouldn't fit.