1U 10" Rack Mount for a 200mm Noctua Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U 10" rack mount for a 200mm Noctua fan.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A 1U mount for a 200mm Noctua fan for a 10" mini server rack.
Materials & Print Settings
The model can be printed in any material as it won't handle any real load. I've printed mine in PETG to allow for some flex in the finished print. It should be fine in PLA as well.
You'll need 4x M3 heat set inserts to mount the fan. The holes are set on a 170mm x 170mm square, which might also fit other 200mm fans.
Print Settings
Filament: PLA, PETG, ASA etc.
4 perimeters for extra strength
20% infill, I use adaptive cubic
0.2mm layer heights
0.4mm brass nozzle
No supports needed
More 10" models
I've made a collection with all my 10" rack models, check it out:
https://www.printables.com/@CJSO/collections/3379517