The Perfect Center Finder (Square/Round) Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,37 € – 4,12 € netto (bez VAT)
Dla pliku: Perfect-Center-Finder-Remix_0.35mm_PLA_MK2S_2h41m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,75 € netto (środek widełek).
- Masa podana przez autora
- 69 g
- Czas druku podany przez autora
- 2,69 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
One of my hobbies is woodturning, and one tool that every woodturner needs is a good center finder. This is the best!
- Ocena
- 5 / 5
- Polubienia
- 329
- Pobrania
- 1836
- Wydruki
- 28
- Wyświetlenia
- 6024
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
One of my hobbies is woodturning, and one tool that every woodturner needs is a good center finder. The Center Finder (Square/Round) by my fellow YouTube Maker, Marius Hornberger, is one of the best I have ever used.
Unfortunately, the center slot is not very conducive to normal wooden pencils, especially if they are on the dull side of sharp. It works perfectly with mechanical pencils, but I often turn rough-sawn bowl blanks, and mechanical pencil lead is just not robust enough to withstand that type of rough surface.
I've seen a few comments on the original model asking for a chamfer down the centerline that would accommodate normal wooden pencils, and since I accidentally broke my print of the original center finder when I stepped on it recently, I felt this was an opportunity to remix the original design.
The model is almost identical to the original in every way except for two things. I added a 45-degree chamfer to each side of the centerline, as well as added a 10mm hole onto the end to better facilitate storage for those of us who like to hang our tools up.
I want to thank Marius for creating the original model, and if you are unfamiliar with his YouTube channel, you should definitely check him out!
To aid in further remixes from the community I have added the design files in all of the relevant formats for you to download.
Design File Included: .stl .f3d, step, .skp and obj files.
*Note: The embossed text seen in the project's cover image is not present in the 3D Printable Model, or any of the design files.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.
Print Settings
- 10-perimeters
- 5-top layers
- 5-bottom layers
- 20% infill
- Rectilinear Infill
- Monotonic Top and Bottom Pattern
- Detect Bridging Perimeters - True
PLA Used: Polymaker Polyterra Eco-Friendly PLA - https://amzn.to/3qPYtzV