3U Rack Mount for 3x Intel NUC 1260P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3U Rack Mount for 3x Intel NUC 1260P - The tall version with room for 2.5" ssd.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A 3U rack mount for 3x Intel NUC 1260P in a 10" mini server rack. The NUCs are the tall version with space for a 2.5" ssd.
I've included a model that is slightly smaller in width (248mm vs 254mm). This model will fit on the Core One/+ bed. The full width model won't!
Materials & Print Settings
The model should be printed in PETG or another strong material as it must handle the significant load of the three NUCs. I've printed mine in PETG. PLA might not work here as the NUCs might get a bit hot.
Print Settings
Filament: PETG, ASA etc.
4 perimeters for extra strength
20% infill, I use adaptive cubic
0.2mm layer heights
0.4mm brass nozzle
Supports are needed for the keyhole shaped slots.
More 10" models
I've made a collection with all my 10" rack models, check it out:
https://www.printables.com/@CJSO/collections/3379517