Full Metal Alchemist Edward Elric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueoforge of Edward Elric from Full Metal Alchemist
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Project: Edward Elric.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x111.11mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#000000 PLA Geeetech Black Transmission Distance: 0.1
#c64343 PLA Insologic Matte Red Transmission Distance: 2.8
#bf2b2b PLA Prusament Lipstick Red Transmission Distance: 3.9
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#5f6575 PLA Esun Grey Transmission Distance: 1.2
#ebb791 PLA Geeetech Matte Skin Transmission Distance: 3.4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.1
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
This print uses 9 unique filaments
Swap Instructions:
Start with Jade White
At layer #7 (0.64mm) swap to Black
At layer #8 (0.72mm) swap to Matte Red
At layer #9 (0.8mm) swap to Lipstick Red
At layer #11 (0.96mm) swap to Black
At layer #14 (1.2mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Grey
At layer #17 (1.44mm) swap to Skin
At layer #19 (1.6mm) swap to Yellow
At layer #21 (1.76mm) swap to Turquoise
At layer #23 (1.92mm) swap to Jade White for the rest.