Louvre lamella clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip system for louvre fences. You can clip in lamella's and combine top ends and regular louvre clips to length.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
A clip that can be combined to create lamellar fencing between posts. Created to build a fence that was both light, easy to assemble, modular and easy to maintain. This kind of fence provides privacy and allows wind to pass through, even sunlight on some angles. The lamello strips in the photo are about 60cm (2ft) long and about 2.8 cm wide and 5 mm thick
Though scaleable, the original is intended for wooden lamella 4-5 mm thick and 2.8-3 cm wide. I used hardwood strips for this. And 4x30 mm wood screws to mount them.
The lamellos are slanted on a 30 degree angle
You will need to mirror the clips for left/right/top/bottom use
I'm fully aware that it would be doable to make this from wood but it wouldn't clip on to the lamella and require a lot of routing/table saw operations and glue which probably won't cope well with being outdoors.
Feel free to comment