Snapmaker U1 Spool Holder With Original Axle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses the axis of the original filament holder.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 438
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like the original spool holder, you need two hands to slide the filament spool on and off, and spools with larger inner diameters fall off.
This spool holder uses the original axle. Pry out the original axle with two screwdrivers, insert foam pieces into the new spool holder with tweezers, and snap the original axle into the new holder.
Spools with an inner diameter greater than 48 mm and a width of up to 78 mm can be used. There's a small ridge on the printer side to keep RFID spools in place near the antenna. This spool holder rotates more easily than the original.
The original axle has ribs, which could cause an aligned seam to snag. Therefore, print the roll with a random seam, using two walls, 15% infill, and no supports. Simply insert the numbers into the slicer using the embossing tool.
I can also recommend my other Snapmaker U1 modifications.