Figurine base adjustment and support: Ayanami Rei (unable to identify model ID)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base adjustment and support pole for a figurine of Ayanami Rei I've bought from AliExpress.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
The figurine in question is Ayanami Rei in stylized outfit with both arms raised to stretch her torso. Both hands behind her head. Wearing high heels. I put some cloth over her to make this SFW. She isn't nude. I just don't quite understand western sensitivity and err on the safe side. If you have the figurine and need a fix, you know how she looks. Simply ID the figure in the photos attached.
Problem this upload solves
The figurine came with quality issue out of the box. You might have it, in that case this can help.
The entire figure has only 1 point that pins such a weighty model on the base. The pin under the left leg. I own a lot of figures and there is no way she'd not bend over in only a few years.
The small pin under the right foot doesn't match the hole on the base.
The floor of the base is NOT flat. This will make the entire model lean/roll which increase chance of the model deforming.
So this upload does 3 things. It adjust the place the right pin goes in. It flatten the base. It supports the model and prevent bending.
To flatten the floor, an additional level of base is introduced. Friction fit under the base as shown in photo. If your part is printed flat, it will hide the deformed base inside and allow the base to lay flat.
The small pin, in my case, is misplaced on all 3 dimentions. The hole isn't where it should be on the base, and the leg is lifted by half a centimetres. Therefore, additional support/pin is introduced. This allow the leg to rest on the pin and connect the pin to the new base surface for additional strength.
A support pole is introduced. The biggest risk from the model is leaning backward because the weight distribution encourages that. The pole, therefore, is designed to counteract that direction of leaning specifically. A grip should be put on top and hold loosely around her neck.
The top side of the base needs to be raised a bit to allow support pole something to hold on it.