10" Modular 6U Server Rack (3D Printable, Creality K1 Friendly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully modular 10-inch server rack designed for home lab setups. The project was created to fit a specific use
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This is a fully modular 10-inch server rack designed for home lab setups. The project was created to fit a specific use case: two mini servers, a network switch, a network controller, and reserved space for a future NAS.
All parts are designed to fit within the build volume of a Creality K1 (220×220×250 mm), so no large-format printer is required and no complex part splitting is needed.
The rack supports up to 6U and is compatible with devices up to 210 × 260 × 44.5 mm (W×D×H).
The construction is fully modular and assembled using screws and heat-set threaded inserts. This allows easy customization - you can adjust height, depth, or spacing with minimal changes to the model.
While the design can still be improved (rigidity, mounting options, cable management), it already serves as a solid and practical base for a compact home lab.
Features:
10" rack format
6U capacity
Modular design
Optimized for 220×220×250 mm build volume
Assembly with screws and heat-set inserts
Easy to modify and extend
Assembly:
Uses standard screws and heat-set threaded inserts
Basic tools required (soldering iron for inserts recommended)
Notes:
Designed primarily for lightweight home lab equipment
Can be reinforced depending on your load requirements