Foqos brick with weights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brick to hold an NFC tag, with interior compartments for magnets and weights.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A 50 × 50 mm brick designed to house a 25 mm NFC tag and embedded magnets. It can be used as a Foqos unlock key, but supports any NFC-based application.
Internal compartments accommodate up to five 5-eurocent coins, adding mass for improved tactile feedback.
The original Fusion 360 (.f3d) file is included to allow straightforward modification of magnet, coin, and tag dimensions. Additional formats provided: STL, 3MF, and STEP.
The model prints without supports. Insert pauses at the appropriate layers to place magnets, coins, and the NFC tag. The supplied 3MF file (compatible with PrusaSlicer) already includes these pauses.