1 / 8
Marvin Stained Glass & Stand (Hitchhiker's Guide)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw a stained glass Marvin posted online somewhere and decided I wanted to make one. This is designed for an AMS…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
I saw a stained glass Marvin posted online somewhere and decided I wanted to make one. This is designed for an AMS printer. It uses the same overlaying colors to make the green as all my previous stained glass designs. I used Inkscape to take an image of Marvin and imported it into SolidWorks.
Apologies for the window picture, it was not very sunny and it doesn't look great.
I included a stand since I didn't add a loop for hanging.
.3mf files are for a Bambu P1S.
Category: 2D Art