1 / 2
Stained Glass Christmas Tree Ornament - (Bambu AMS Print) — zdjęcie 1
1 / 2

Stained Glass Christmas Tree Ornament - (Bambu AMS Print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue…

Ocena
0 / 5
Polubienia
6
Pobrania
8
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue translucent colors to build up the layers to make all the color variations.

I used Solidworks to sketch and extrude this. Each section was independently extruded and layered to make the color composition.

All of these mixed layer prints will give a warning about floating objects. It is because the various layers are supported by other colors underneath them, but all the layers have floating objects.

I used Sunlu Red and Blue Translucent PLA and JAYO Yellow translucent for this print. The print file calls for black for the outline, but I had a silver/gray available and used it instead.

Category: 2D Art

Tagi