Stained Glass Bird - (Bambu AMS Print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a color mix print for a Bambu with an AMS. The objects are printed by color on each layer. This print uses a…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
This is a color mix print for a Bambu with an AMS. The objects are printed by color on each layer. This print uses a dark color for the outline (usually black, but I've been using a dark blue I have), and translucent red, yellow, and blue.
The color layers are built up red, yellow, and blue and make all the colors seen in the picture.
I made this by converting a line image in Inkscape to a dxf and then imported it into SolidWorks. All the colors were individually extruded for each section to create the color layers.
All of these mixed layer prints will give a warning about floating objects. It is because the various layers are supported by other colors underneath them, but all the layers have floating objects.
The separated parts need to be lined up properly to print correctly. The included .3mf file is for a Bambu P1S.
Category: 2D Art