MEOWMERE - Fullsize Terraria Sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a large scale project. It's taken me the better part of three weeks to break down the sword into printable…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is a large scale project. It's taken me the better part of three weeks to break down the sword into printable sections. I have a 200mm square bed, so keep that in mind, this may not fit on all printers.
Print 1 each of all the parts except you can print either 1 MEOWB or 1 each of MEOWB1 & B2. I made it a tongue and groove assembly to let me print it in two nights instead of one whole day.
You will need 2 30mm pegs for the MEOWB to BLADE_BASE_A connection
And finally, 15 of the standard pegs. (17 PEGS TOTAL)
You will also need a lot of crazy glue, primer, paint, etc. I have all but the last two pieces printed. I will post a make when it is completed.
I have printed all the parts with 20% infill and 0.2 LAYERS.
The parts are at a 45 degree angle since I traced the original bitmap from the game. So all the STLs need to be re-oriented.
Enjoy!
Print Settings
Printer:
Da Vinci 1.0
Rafts:
No
Supports:
No
Resolution:
0.2 Layers
Infill:
20%
Category: Toy & Game Accessories