Steel Sheet Dust Protection Cover - Prusa Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This covers your used steel sheet and protects it from dust or other stuff.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
As Im not a poweruser with 24/7 printing, there are some days where the bed has enough time to collect some dust flying around.
This design puts a small cover on the steel sheet, so you dont need the clean it everytime you use it. Also during maintenance work, it can protect your sheet from any falling parts.
Ive created two versions of the cover.
- "Sheet Cover Fullsize.stl"
is a one piece print which covers the whole bed, but isnt printable directly on the Prusa Mini, as the dimension exceeds the total bed size.
But as I also have a Creality CR-10 Mini, Ive printed it on this. - "Sheet Cover Part1 - 4"
is the same as the fullsize one, but splitted in four parts, so you can print it on the mini and glue it together.
The two holes on the top are matching the two screws which are the top alignment for the sheets.
As its just 0,6mm thick (three layers if printing in 0,2mm layer height), its very flexible and can be easily handled.
Ive printed it in PLA, but it should be also fine with PETG.
Please remind: You should let your bed cool down before you place it back on.
Happy printing and keeping away the dust :-)