Hydra | Foam Musket blaster with swappable barrels!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low hardware (with optional hardware) Nerf musket with quick barrel changes and lots of options!
- Ocena
- 4,833 / 5
- Polubienia
- 109
- Wydruki
- 12
- Wyświetlenia
- 4722
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Standard Digital File License
You can get a set of hardware here
Overview:
Musket look and feel, Prime the blaster with a ramrod and then ram the projectile into the barrel!
Twist lock for the barrels and the ramrod
Barrels for Elite, Mega, Rival and MegaXL darts
Optional tacticool frame with picatinny stock and AFG
Printing and hardware:
180mm³ Printer required, you may have to angle long parts by 45° on your buildplate
Print settings are labeled on their respective folders. No supports needed
The folders labeled Color(A,B,C/C) will get you a finished rifle stock musket. if you want to look into the other options check if they replace parts and you may save yourself some filament.
4mm elastic string required (this stuff) (5/32" will work too)
Filament use for a stock blaster (None of the optional parts and just the elite barrel):
Color
Amount
ColorA (Barrel/Trim)
440,51g
ColorB (Frame and stock)
385,35g
ColorC (Orange)
293,93g
Optional Hardware:
Part
Amount
Polycarbonate Tube, OD 1-1/2", ID 1-3/8"
145mm (Talonclaw length)
#016 Oring (Face Seal)
1
#123 Oring (Plungertube&Plunger Seal)
3