1 / 2
RR V-Core 4 Bed Chain + Wagoo for MRW arms — zdjęcie 1
1 / 2

RR V-Core 4 Bed Chain + Wagoo for MRW arms

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mod for bed chain + wagoo for quick disconnect on MRW arms

Ocena
0 / 5
Polubienia
9
Pobrania
13
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

FYI - This was only tested on a 300, for 400/500 the position for the hole feeding cables would have to move down with relation to the electronics bay as it stays in the same position on all models.

Drag chain used was a 10x15mm.

Assembly: 

M3 screws + nuts to hold dragchain to mounts.

M4 screws to mount holder to panel.

Tagi