1 / 10
Aeon Trespass Odyssey - Titan Tray Holders with optional Triskelion — zdjęcie 1
1 / 10

Aeon Trespass Odyssey - Titan Tray Holders with optional Triskelion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trays to hold the Titan cards in Aeon Trespass Odyssey, with integrated Triskelion dials and holders for cards and token

Ocena
0 / 5
Polubienia
6
Pobrania
76
Wydruki
0
Wyświetlenia
482
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

Edit 08.2026 - Added Gear Card trays!
Edit 10.2026 - Added version of trays for NO SLEEVES (like mine...).

Love this beast of a game and last week restarted playing it. One thing that annoyed me was how the Kratos and Strain cards ended up everywhere, the tokens as well, I could forget the tokens, and well, the Triskelions also... and the cardboard Triskelions with time get looser and you might confuse its values. Like this...

So, to...

  • Keep all tiddy

  • Help with storage

I designed these trays to hold the Titan cards, Triskelion values, and Kratos and Strain cards and any Tokens your Titan has gained. With them, if you store them they stack nicely and hold your cards and Triskelion values in place.

Two versions of the Titan Trays are provided:

  • One with Triskelion dials on the right side.

  • One without Triskelion, if you prefer to use the cardboard or an aftermarket Triskelion.

The trays are a 'sandwich' of 4 parts:

  1. Lower tray - the base of everything.

  2. Upper tray - the one you put the Titan card against.

  3. In between these two trays:

    1. Put 3 Brackets into the small support (see image below).

    2. Put the 3 Dial Wheels. Note two versions of Dial Wheels are provided depending on what order you want them to increase or decrease. 

  4. Frame - snaps above and onto the upper tray, holding the Titan card in place.

  5. Card Frames - snaps into place under the Frame, to hold the Strain and Kratos card.

    1. As the location of these change between Titans, I have provided versions for all Titan cards released so far that I am aware of. 

    2. Two versions provided: for sleeved cards and for non sleeved cards. Initially I only had the sleeved cards versions but it is a bit annoying to have the empty space around the frame. 

The Lower and Upper tray are supposed to stay snapped together permanently. That's why their fit is quite tight.

Removing the Frame is not necessary to change Titan card - there is a small indent where you can put in a nail and raise the card. For sleeved Titan cards, just slide them from the bottom (raising the upper frame slightly). 

As an option, 2 Gear Cards Trays:

  • One at left side for 2 or 3 gear cards.

  • One at the bottom for 5 cards.

  • Three versions of each:

    • One that fits my sleeves fine and has same width as the Titan Tray.

    • Another that fits wider sleeves, as someone requested this since his sleeves would not fit in my size.

    • One that is targeted at cards without sleeves.

Print instructions:

  • Choose either with Triskelion or not, download and print all files from that folder.

  • All parts can be printed with 0.40 nozzle, although I preferred 0.25 for the wheels.

  • For people without multicolor prints, I have provided a version of the Frame for mono printers.

  • No supports needed.

  • Print all trays 4 times. Print the wheels and brackets 3 times each per tray, so in total 12 needed.

  • Wheel for my taste looks good in black, numbers I put 0 in green, 9 in red, the other in golden.

    • Note there are two version of the wheels, depending on how you prefer the numbers to be ordered.

  • Note: I have not tested  the ones without Triskelions, waiting for an online friend to test them.

Enjoy!

Edit 09.05.2026 

  • On user request, added a wheel with numbers reversed as that felt more intuitive to them

Edit 15.06.2026

  • Text on latest version of Frame v2.3mf was 'Damage', fixed changing to 'Danger'. Also fixed Frame v2 Single Color.3mf.

Edit 04.09.2026

  • Added Gear Trays.

  • A buyer of my printed versions could not fit his sleeves in the spaces. My sleeves, SleeveKings 60micron, fit. So, I have uploaded a new version of the Gear Trays which has more space. 

-- -- -- -- -- -- -- -- --

I would LOVE to see your makes!

Pease do not sell this part! I am offering this on my Etsy store.

Please like and share your makes, and check my other ATO models: Aeon Trespass Odyssey Collection by JuanV | Printables.com

Tagi