RV12 Flap Handle Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to protect the flap handle locking mechanism from entanglement with the seatbelt.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Cover for 'legacy' RV-12 Flap handle locking mechanism. Without the cover the exposed flap handle locking mechanism can become entangled with the seatbelt. This can prevent the flaps from extending because the seat belt is jamming the lock bar, it can also damage the seat belt material. The cover is retained by 2 #6 screws that fasten to plate nuts that are added to the F-1228 Seat Floor Cover.
The cover should be printed with the back side down on the print bed. The thin wall side sections and mounting base areas tend to lift if adhesive is not use on the print bed (if using ASA or CF nylon). Brim is also recommended.