Terrarium Tunnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A textured tunnel that fits in the corners of terrariums. Lizards and Reptiles can go through it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This tunnel is designed to fit in the corner of an enclosure for lizards or reptiles. It can be filled with dirt so they have something to dig through, or just used as a shelter. The tunnel can be oriented in multiple ways.
The model prints upside-down, so I have included a textured "top" to glue onto the smooth side.
Please print in a heat resistant material. Using a brim is highly recommended as this is a large print. I printed this in ASA on a smooth PEI build plate.
The final model is approximately 8x8x4 inches. Scale it in your slicer for your needs.
Probably not a good idea for rodents, they may chew on it.